5 Minutes Work To Substitute Your IPhone 6 Plus Broken Display

iphone 6 screen digitizer

Because the display screen of iPhone 6 plus has been enlarged to 5.5 inches, the possibility of breaking it has additionally been enlarged. If sadly you broke your iPhone 6 plus screen, official repair will price you as much as every week exclude the time you make the appointment. So if you are skilled sufficient, replacing the iPhone 6 plus damaged display screen your self is a better selection. Right here we are going to stroll you through a 5 minutes DIY repair information for replacing the broken iPhone 6 plus damaged display.


Cracked the iPhone 6 display screen? No worry! Just comply with this step by step iPhone 6 display replacement information, it's solely a 10 mins work!


Please note: Resun This process was achieved by our experts who've years of expertise of take apart telephones, and we used the half which already have these small components pre-assembled. This post is by no means a reference for these who're expert sufficient to restore their iPhone 6+, do that at your own threat, etradesupply won't be chargeable for any injury happened through the restore process.


Tools Needed:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Instrument
Case Opening Software


Step 1. Shut down your iPhone 6 plus earlier than you do anything. (Be sure you’ve carried out this earlier than the disassembly begins, or chances are you'll trigger quick circuit of the inner parts of the telephone which may hurt the motherboard)


Step 2. Undo 2 screws on the underside with the help of the Pentalobe Screwdriver. (We suggest you to make use of a magnetic pad for placing those screws in case dropping them)


Step 3. Stick the suction cup on the bottom of the telephone and then pull out the broken display. (In case your screen has already shattered badly, use transparent adhesive tape to cowl the surface of the screen to avoid any additional damage)


Step 4. Undo 5 screws holding the steel cover, then take the steel cowl out.


Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front going through digital camera connector and home button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD display meeting with house button, frame and front dealing with digicam, then you definitely just want to put the new one on)


Step 6. Undo the three screws holding the house button retaining bracket then pick it up.


Step 7. Pry up the home button flex cable connector then take away the home button.


Step 8. Undo the 3 screws that holding the steel cowl on the ear speaker.


Step 9. Take out the retaining bracket, ear speaker and front going through digicam.


Step 10. Undo the 7 screws that locking the LCD steel plate.


Step 11. Pry up the LCD again plate connector.


Step 12. Exchange your broken display screen with the brand new one.


Observe: We strongly advocate you to test the operate of the brand new iPhone 6 plus digitizer and LCD display screen meeting earlier than you install it on. Should you unfortunately get the defective part, you possibly can ask your supplier to change for a new one.